Skip to main navigation Skip to main content Skip to page footer

01

Selection criteria

Choose a Sia sanding belt for the workpiece and process

Start with the material, the initial surface condition and the finish you need. For metal, the product data describe 2820 siamet as a cloth belt for unalloyed steel and non-ferrous metals and 2800 siaron for high stock removal in wet and dry use. For wood and paint preparation, 1919 siawood + is listed as a paper wide belt. Then check the grain, backing, belt width and length against your machine and process step. The belt you currently use provides a useful point of comparison: what matters is whether you need to improve stock removal, service life or the surface finish in your particular process.

02

Sia sanding belts

Sia sanding belts in the range

The product listing shows Sia sanding belts in different belt forms, dimensions and grit sizes. Compare the specifications of each item with your machine and application.

No products found

No products are currently listed in this category. Request a call back and we will help you find the right product.

Request a callback

03

Choosing Sia sanding belts

From your current belt to the right version

When the sanding task changes, the same product name alone is often insufficient to guide selection. Tell us the material, initial surface, required result and dimensions of the belt currently in use. The catalogue describes the cloth version 2820 siamet for metalworking and the paper wide belt 1919 siawood + for wood and paint preparation. The suitable grain and backing also depend on the load, machine and whether the process is wet or dry.

Krückemeyer GmbH converts suitable coated abrasives into sanding belts. The confirmed production framework covers widths of 6–610 mm and lengths of 283–16,500 mm; the extremes cannot necessarily be combined. We assess the material, dimensions and belt joint for each enquiry.

04

Questions about Sia sanding belts

How do I choose between Sia sanding belts with cloth and paper backing?

Start with the workpiece, process step and machine. In the current range, 2820 siamet is a cloth sanding belt for metalworking, while 1919 siawood + is listed as a paper wide belt for wood and paint preparation. The backing is an important selection factor, but it does not replace an assessment of the grain, load and required surface finish. Compare the details of the specific listed item with the belt you use now, and describe your application if you want to evaluate another version.

What information helps you advise on a Sia sanding belt?

The material, initial condition, target surface and process step are useful, along with the brand and version of the belt you currently use. Add the required belt width and length, the machine, and whether sanding is dry or wet. This makes it possible to compare the belt form, backing and grain with the listed versions. If the current belt wears too quickly, loads up or fails to produce the required finish, describe that specific problem. Suitability must be assessed for the particular combination.

Can Krückemeyer convert Sia sanding belts to other dimensions?

Yes. Suitable coated abrasives can be converted into sanding belts for the application. The confirmed overall production framework for sanding belts is 6–610 mm in width and 283–16,500 mm in length. These extremes cannot necessarily be combined. Whether a particular Sia input material, the requested dimensions and a suitable belt joint work together must be assessed against the material and application. Please provide the workpiece, machine and operating conditions as well as the dimensions.

How do the listed Sia sanding belt families differ?

The product data show different tasks and constructions: 2820 siamet is listed as a cloth belt for metalworking, 2800 siaron as a cloth belt for high stock removal in wet and dry use, and 1919 siawood + as a paper wide belt for wood and paint preparation. Dimensions and grit sizes also vary within a family. Compare each individual item and its stated uses. The family name alone does not establish suitability for every material, machine or required finish.

05

Request advice

Describe the workpiece, machine, belt currently in use and required finish. We will discuss the suitable Sia version with you and assess conversion where needed.

Enquire about a Sia sanding belt for your application

Send us your belt dimensions and sanding task. We will review the listed versions and suitable conversion options.

Jürgen Müller

Abrasives advice

Jürgen Müller

Contact for products

Discuss the material, machine and required sanding result with Jürgen Müller.

Advice and sales to business customers only!